General Manager of Jingdian repudiated the layoffs

Taiwan's LED industry rumors that Jingdian will lay off staff, Crystal Power's general manager Zhou Mingjun came out to clarify the rumors.

Zhou Mingjun said that although the demand for LED TV is currently under repair, the customer base of Jingdian is quite wide, and the demand for LED lighting can be compensated. The distribution market is not only in Korea, but also in Taiwan, China and Japan. The Korean panel factory has repaired the shipment of LED TV, and the impact on the crystal power will not be too great.

For the outside world, the company has been cut off in August and September. Zhou Mingjun stressed that from August shipments, the probability of a record high revenue is quite high. The production capacity in September has also been covered, and the revenue is at least Will remain at the high end. As for the new LED TV model orders in October, Jingdian’s five factories in Hsinchu and the two factories in Nanke are normal, and the production line is still recruiting engineers and production line operators. “How can there be layoffs? ?".

It is reported that Jingdian's revenue in the first half of the year reached NT$9.274 billion, with a gross profit margin of 37.75%, of which Q2's gross profit margin reached 39%, net profit after tax was RMB 2.692 billion, and the share capital was RMB 7.69 billion. The net profit per share after tax was 3.5 yuan, and the profit reached a record high. The gross profit rate in July reached 41%, setting a new high in recent years.

Related stock price 2010/09/03 - 10:40 Crystal Electric TWD 84.20 (+2.81%)

 A Dc Motor is any of a class of rotary electrical machines that converts direct current electrical energy into mechanical energy. The most common types rely on the forces produced by magnetic fields. Nearly all types of DC motors have some internal mechanism, either electromechanical or electronic, to periodically change the direction of current flow in part of the motor.


DC motors were the first type widely used, since they could be powered from existing direct-current lighting power distribution systems. A DC motor's speed can be controlled over a wide range, using either a variable supply voltage or by changing the strength of current in its field windings. Small DC motors are used in tools, toys, and appliances. The universal motor can operate on direct current but is a lightweight motor used for portable power tools and appliances. Larger DC motors are used in propulsion of electric vehicles, elevator and hoists, or in drives for steel rolling mills.

  dc motor











 

Dc motor areas of application: smart home field, robotics, precision medical equipment industry, automotive drive field, electronic products and personal care equipment



Application of the product:




dc motordc motordc motor


Features: high torque, low noise, small volume, light weight, easy to use, running constant speed, etc., can also be matched with various gearboxes to change the output speed and torque.


Features: small volume, fast speed, stable performance, low price, good speed regulation.

    N20 dc motor      dc motor


Method of use: the best stable in horizontal plane, installed on the dc motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

Dc Motor 2

Operating temperature range:

DC motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

DC motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of DC motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

dc motor


Dc Motor

Dc Motor,Small Dc Motor,Mini Dc Motor,Robot Dc Motor,Dc Motor With Gearbox

Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com