Fluorescent tube energy-saving standard energy efficiency benchmark

Fluorescent tube application for energy-saving stamp certification, its products need to comply with national standards CNS 691, CNS13755, CNS 10839 and CIE 13.3 for testing, the measured values ​​must meet the following standards: Lamp luminous length 100cm above the standard color range energy-saving stamp Energy efficiency benchmark with CNS 691 test requires test ballast with CNS 13755 verification login qualified electronic ballast bulb color (L-EX: 2600~3150K) warm white (WW-EX: 3200~3700K) white (W-EX: 3900~4500K) Luminous efficiency ㄒ92 lm/W Average color rendering index ㄒ80 Luminous efficiency ㄒ96 lm/W Average color rendering index ㄒ80 昼White (N-EX:4600~5400K) Cool white (CW-EX:4600~ 5400K) luminous efficiency ㄒ90 lm/W average color rendering index ㄒ80 luminous efficiency ㄒ94 lm/W average color rendering index ㄒ80 昼 light color (D-EX: 5700~7100K) luminous efficiency ㄒ86 lm/W average color rendering indexㄒ 80 luminous efficiency ㄒ90 lm/W average color rendering index ㄒ80 lamp length less than 100cm standard chromaticity range energy-saving standard energy efficiency benchmark with CNS 691 test requirements test ballast with CNS 13755 verification login qualified electronic ballast Light bulb color (L-EX: 2600 ~3150K) Warm white (WW-EX: 3200~3700K) White (W-EX: 3900~4500K) Luminous efficiency ㄒ84 lm/W Average color rendering index ㄒ80 Luminous efficiency ㄒ87 lm/W Average color rendering indexㄒ80昼White (N-EX: 4600~5400K) Cool white (CW-EX: 4600~5400K) Luminous efficiency ㄒ81 lm/W Average color rendering index ㄒ80 Luminous efficiency ㄒ84 lm/W Average color rendering index ㄒ80 昼光色( D-EX: 5700~7100K) Luminous efficiency ㄒ78 lm/W Average color rendering index ㄒ80 Luminous efficiency ㄒ81 lm/W Average color rendering index ㄒ80 (The above product energy efficiency documentation must indicate the stabilizer type) The following points should be noted in the marking of the energy efficiency benchmarks of the previous energy-saving stamps: (1) The name and address of the user of the stamp must be clearly stated on the product or packaging. (2) If the user of the mark is an agent, the name and address of the manufacturer shall be recorded on the product or packaging. (3) The product's luminous efficiency (lm/W) and average color rendering index should be indicated on the product catalog. (4) The measured luminous efficiency of the product is calculated to an integer, and the first digit after the decimal point is rounded off.


1